Total amount: 0 UAH

Choose delivery method:

City and branch number:

Payment method:

Enter your phone number:

Enter your email:

Enter your name:

PRODUCTS

HTA 40

Comments UNIVERSAL PENETRATING OIL “HTA 40 ” 400 ml

The symbiosis of innovative high-quality lubricants for industrial and domestic applications. Oil quickly returns mobility to rusted parts, softens rust, cleans oil and grease contaminants from surfaces, displaces moisture. It does not evaporate, it has an increased degree of protection of components against corrosion and oxidation. Defrosts knots, prevent their freezing. Neutral with a variety of materials, including plastics, elastomers, metals and wood.

109UAH

Description

Application:

disassemble of rusted and sticky threaded joints; plain and rolling bearings; guideways, chains, chain and gear transmissions; steel ropes, freight cables; spline and keyway connections, electrical contacts; locks and hinges of doors; levers, joints, rods, fasteners of body elements and chassis.

Industries:

  • A universal product is suitable for use in any industry and at home.
Характеристики смазки:
Mineral base oil
Color Brown
Con. viscosity at 40 °C 8.1-11.5 mm2 / s DIN 51562
Operating temperatures -50 °C to +100 °C

Technologies

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

FAST ON

The rate of penetration into the metal for loosening rusted parts is 2 times higher than that of similar penetrating lubricants.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

Directions

It works in any position at 360 degrees (even bottom up). Shake the bottle for 5 to 10 seconds before use. To handle hard-to-reach spots, place the extension tube in a horizontal position. Inflict on a pre-cleaned surface. Remove excess oil. After 3-5 minutes, without applying excessive force, proceed to disassemble. Heavily rusted parts abundantly treat the spray for 20 minutes before disassembling.

Hide

Comments

HTA 40 Review

Add review for product HTA 40










Are you bot?

НТА PTFE

Comments CONSISTENT GREASE WITH TEFLON «НТА PTFE SPRAY» 400 ml

Special synthetic lubricant based on polytetrafluoroethylene or teflon. Due to the unique properties of teflon, the grease is more durable, more resistant to acids, salts and alkalines. It forms a layer on the surface that prevents corrosion processes, removes traces of rust, penetrates deeply and reduces the friction coefficient. Compatible with a variety of materials, including plastics, elastomers, metals and wood.

339UAH

Description

Application:

Bowden cables, windlasses, chain drives; hinges of doors and furniture, lock holes, furniture castors; guideways and roller conveyors, window lifters and sliding hatches;rolling and plain bearings; worm gear, threaded connections; precision mechanics, turbines, fittings; car suspension, chassis; bushings, sleeves, shafts and spindles.

Industries:

  • Machine building and Metalworking;
  • automobile Manufacturing;
  • construction materials Industry;
  • Wood, wood processing and pulp and paper industry;
  • Printing industry;
  • Light industry
  • Chemical industry
Characteristics of the lubricant:
Lithium Thickener
The base oil polyalphaolefin
Color Beige
NLGI class 2
Kin. viscosity at 40 °C 32 mm2 / s DIN 51562
Kin. viscosity at 100 °C 6 mm2 / s DIN 51562
Operating temperatures -50 °C to + 140 °C

Technologies

NEW TECHNOLOGY 360°

The updated technology allows you to spray the sprayer in any position (upside down). This creates comfort and ease of use.

OZONE FRIENDLY

All products do not contain ozone-depleting components, safe for the atmosphere.

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

Directions

It works in any position at 360 degrees (even bottom up). Shake the bottle for 5 to 10 seconds before use. To handle hard-to-reach spots, place the extension tube in a horizontal position. Inflict on a pre-cleaned surface. Remove excess oil. After 3-5 minutes, without applying excessive force, proceed to disassemble. Heavily rusted parts abundantly treat the spray for 20 minutes before disassembling.

Hide

Comments

НТА PTFE Review

Add review for product НТА PTFE










Are you bot?

НТА FOOD H1

Comments MULTI-PURPOSE GREASE WITH FOOD CERTIFICATE “HTA FOOD H1” 400 ml

Synthetic grease is designed for all components in the food, pharmaceutical and medical industries. It has excellent lubricating properties, high resistance to water and water vapor, alkaline and acid disinfectants and cleaners. Reduces the need for various types of lubricants for maintenance and servicing. Compatible with a variety of materials, including plastics, elastomers and metals. It has food certificate NSF-H1, HALAL and KOSHER approvals.

290UAH

Description

Application:

equipment for freezing, packaging, storage and transportation of pharmaceutical and food products; machinery for grinding grain and flour; coffee machines, mixers, blenders and other electric drive equi ent; conveyor belts and chains on production lines; bearings, conveyor rollers, etc.; compressors, air conditioners and hydraulic systems.

Industries:

  • Food industry;
  • Pharmaceutical industry;
  • Medical industry;
  • flour and cereals industry;
  • Feed industry;
Characteristics of the lubricant:
Thickener Calcium base
Base oil Synthetic hydrocarbon
Color Light brown
NLGI class 2
Kin. viscosity at 40 °C 50 mm2 / s DIN 51562
Kin. viscosity at 100 °C 8 mm2 / s DIN 51562
Operating temperatures -45 °C to + 160 °C

NSF H1: физиологически безопасные материалы, применяемые для обслуживания оборудования пищевой и фармацевтической отраслей.

Koscher: обозначение для продуктов, которые по израильскому предписанию о приеме пищи считаются чистыми, разрешенными.

Halal: обозначение для продуктов, которые соответствуют мусульманским предписаниям halal.

Technologies

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

(FPSL) FOOD PROCESSING SAFE LUBRICANTS

Special safe lubricants for the food and pharmaceutical industries, using which for their intended purpose, technically inevitable contact with foodstuffs cannot be excluded.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

Directions

It works in any position at 360 degrees (even bottom up). Shake the bottle for 5 to 10 seconds before use. To handle hard-to-reach spots, place the extension tube in a horizontal position. Inflict on a pre-cleaned surface. Remove excess oil. After 3-5 minutes, without applying excessive force, proceed to disassemble. Heavily rusted parts abundantly treat the spray for 20 minutes before disassembling.

Hide

Comments

НТА FOOD H1 Review

Add review for product НТА FOOD H1










Are you bot?

HTA COPPER ANTI – SEIZE

Comments COPPER ANTI-SEIZE PASTE "HTA COPPER ANTI-SEIZE" 400 ml

High-temperature release paste used to prevent bolts from sticking in threaded joints, sintering screws, bolts, springs and flat metal seals. It allows for reliable, non-destructive disassembling after a long working time, in extremely high temperatures. Reduces the torque of the threaded joints, has a high electrical conductivity. It prevents the effect of cold welding, protects friction during corrosion, forms an effective lubricating and separating film on bushings, screws, threaded, nodal and bayonet joints of all kinds. Resistant to moisture, steam, salt solutions, acid compounds and alkalines. Attention! The product must not be used for the lubrication of rolling and plain bearings. The paste contains petroleum products – do not apply in the presence of oxygen.

299UAH

Description

Application:

drill pipes, drive chains, forging dies, friction rings, fuel nozzles, gas burners, heat exchangers, hinges and sight holes, hinges, pumps, perforators, dowels; pipe fittings, valve retaining rings, valve supports and submersible pumps; bolts, bushings, flanges, seals, manifolds, nuts, press fittings, screws, pins, threading devices, threaded connections, adjusting screws, broaching machines, capacitors, couplings, cylinder heads; high-temperature compressor heads, threaded connections, stainless steel structures, catalytic cracking units, heat exchangers, autoclaves; cranes over heating wells, ingot extraction pliers, hob panels; turbine racks, intake manifold blocks, cylinder heads and exhaust manifold racks, steam lines, coal grinders.

Industries:

  • Railway equipment;
  • Chemical industry;
  • Glass and foundry industry;
  • Metallurgical industry;
  • Shipbuilding and naval equipment;
  • Paper and packaging industry;
  • Rrubber processing and plastic processing;
  • Mechanical engineering and metalworking;
  • Automotive manufacturing and repair;
  • Use in factories and factories;
Characteristics of the lubricant:
Thickener Aluminum complex soap
Solid lubricants Copper strip / graphite
Base oil Mineral
Color Copper
NLGI class 1
Kin. viscosity at 40 °C 270 mm2 / s DIN 51562
Kin. viscosity at 100 °C 16 mm2 / s DIN 51562
Kin. viscosity at 100 °C -20 °C to + 1100 °C

Technologies

OZONE FRIENDLY

All products do not contain ozone-depleting components, safe for the atmosphere.

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

Directions

It works in any position at 360 degrees (even bottom up). Shake the bottle for 5 to 10 seconds before use. To handle hard-to-reach spots, place the extension tube in a horizontal position. Inflict on a pre-cleaned surface. Remove excess oil. After 3-5 minutes, without applying excessive force, proceed to disassemble. Heavily rusted parts abundantly treat the spray for 20 minutes before disassembling.

Hide

Comments

HTA COPPER ANTI – SEIZE Review

Add review for product HTA COPPER ANTI – SEIZE










Are you bot?

HTA ANTI - SEIZE Н1

Comments WHITE ANTI-SEIZE PASTE WITH FOOD CERTIFICATE «HTA ANTI - SEIZE» 400 ml

The high-temperature paste is used to prevent bolts jamming in threaded joints, sintering of screws, bolts, springs and flat metal seals. It allows for reliable, non-destructive disassembling after a long working period, in conditions of extremely high-temperatures and high loads. It has an extremely good separation ability. Prevents the effect of electrolytic reaction (cold welding), protects friction units during corrosion, forms an effective lubricating and separating film on bushings, screws, threaded, nodal and bayonet joints of all kinds. Resistant to moisture, steam, salt, acid compounds and alkalines. It does not contain toxic substances and heavy metals, have NSF-H1 food certificate.

295UAH

Description

Application:

drive chains, forging dies, friction rings, fuel nozzles, gas burners, heat exchangers, hinges of hatches and sight holes, hinges, pumps, perforators, dowels; pipe fittings, valve retaining rings, valve supports and submersible pumps; bolts, bushings, flanges, seals, manifolds, nuts, press fittings, screws, pins, threaded connections, adjusting screws, gears, bearings, nozzles, conveyor belts, studs, tools or cylinders; high-temperature compressor heads, threaded connections, stainless steel structures, heat exchangers, autoclaves; faucets above heating wells, ingot extraction pliers, hob panels.

Industries:

  • Food industry;
  • Pharmaceutical and medical industry;
  • Flour, cereals and feed industry;
  • Railway equipment;
  • Chemical industry;
  • Glass and foundry industry;
  • Metallurgical industry;
  • Shipbuilding and naval equipment;
  • Paper and packaging industry ;
  • Rubber processing and plastic processing;
  • Mechanical engineering and metalworking;
  • Use in automobile production and repair;
Characteristics of the lubricant:
Thickener Gel
Base oil Mineral white oil
Color White
NLGI class 1
Kin. viscosity at 40 °C 70 mm2 / s DIN 51562
Kin. viscosity at 100 °C 9 mm2 / s DIN 51562
Operating temperatures -40 °C to +1400 °C

NSF H1: физиологически безопасные материалы, применяемые для обслуживания оборудования пищевой и фармацевтической отраслей.

Technologies

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

(FPSL) FOOD PROCESSING SAFE LUBRICANTS

Special safe lubricants for the food and pharmaceutical industries, using which for their intended purpose, technically inevitable contact with foodstuffs cannot be excluded.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

Directions

It works in any position at 360 degrees (even bottom up). Shake the bottle for 5 to 10 seconds before use. To handle hard-to-reach spots, place the extension tube in a horizontal position. Inflict on a pre-cleaned surface. Remove excess oil. After 3-5 minutes, without applying excessive force, proceed to disassemble. Heavily rusted parts abundantly treat the spray for 20 minutes before disassembling.

Hide

Comments

HTA ANTI - SEIZE Н1 Review

Add review for product HTA ANTI - SEIZE Н1










Are you bot?

HTA CHAIN and DRIVE

Comments MULTIPURPOSE OIL FOR CHAINS «HTA CHAIN AND DRIVE» 400 ml

Synthetic ultra-efficient multi-purpose chain oil. Reduces friction and wear, creates a strong lubricating film on the chain, does not drop and does not drain. It has a low percentage of evaporation and susceptibility to dust, as well as unique wetting, adhesive and penetrating properties. The oil is highly resistant to stress, to any weather conditions, weak acids and bases. Water-repellent and pH neutral, food certificate NSF-H2 approved.

200UAH

Description

Application:

heavy chains in multilevel storage systems; chains of conveyors, heavy chains of coating plants; dampers, sterilizers and steel ropes; guideways, large chains, open and closed gears; textile frame, rollers, bearings, joints and loops, pulleys; shrink tunnels, bakeries, printing machines and drying ovens.

Industries:

  • Food industry;
  • Pharmaceutical industry ;
  • Medical industry;
  • Flour, cereals and feed industry;
  • Automotive industry;
  • Printing industry;
  • Light industry;
  • Forestry, woodworking and pulp and paper industry;
  • Chemical industry
Characteristics of the lubricant:
Base oil Ether
Color Light yellow
Kin. viscosity at 40 °C 250 mm2 / s DIN 51562
Kin. viscosity at 100 °C 24 mm2 / s DIN 51562
Operating temperatures -45 °C to +250 °C

NSF H2: intended for general use in the food processing industry, where contact with food is excluded.

Technologies

OZONE FRIENDLY

All products do not contain ozone-depleting components, safe for the atmosphere.

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

Directions

It works in any position at 360 degrees (even bottom up). Shake the bottle for 5 to 10 seconds before use. To handle hard-to-reach spots, place the extension tube in a horizontal position. Inflict on a pre-cleaned surface. Remove excess oil. After 3-5 minutes, without applying excessive force, proceed to disassemble. Heavily rusted parts abundantly treat the spray for 20 minutes before disassembling.

Hide

Comments

HTA CHAIN and DRIVE Review

Add review for product HTA CHAIN and DRIVE










Are you bot?

HTA HIGH LOADS CHAIN

Comments EXTREME LOAD CHAIN OIL «HTA HIGH LOADS CHAIN» 400 ml

High viscosity synthetic oil, which is used in conditions of highly loaded mechanical units with a long service life. It shows stable work with all types of chains, at high operating temperatures and high speeds, economically in use. The oil has high adhesive properties, as well as excellent wetting and penetrating abilities. The oil is highly resistant to hot and cold water, guarantees the best protection against corrosion, against all weather conditions and weak acids and bases, pH-neutral. Does not form a precipitate even under the influence of high temperatures and when used outdoors. Reduces up to 60% of chain defects during service.

270UAH

Description

Application:

large chains and open gears in internal or external areas; chains and drive mechanisms in furnaces, dampers and sterilizers; open gearboxes and gears; conveyor belts, conveyors and slideways; forklifts, hoists and windlasses, wire ropes; rollers, bearings, joints and loops, pulleys.

Industries:

  • Flour, cereals and feed industry;
  • Automotive industry;
  • Printing industry;
  • Light industry;
  • Forestry, woodworking and pulp and paper industry;
  • Mechanical engineering and metalworking;
  • Construction materials industry;
  • Chemical industry;
Characteristics of the lubricant:
Base oil Ether
Color Yellow
Kin. viscosity at 40 ° C 3000 mm2 / DIN DIN 51562
Kin. viscosity at 100 °C 180 mm2 / s DIN 51562
Operating temperatures from -15 °C to +250 °C

Technologies

OZONE FRIENDLY

All products do not contain ozone-depleting components, safe for the atmosphere.

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

Directions

It works in any position at 360 degrees (even bottom up). Shake the bottle for 5 to 10 seconds before use. To handle hard-to-reach spots, place the extension tube in a horizontal position. Inflict on a pre-cleaned surface. Remove excess oil. After 3-5 minutes, without applying excessive force, proceed to disassemble. Heavily rusted parts abundantly treat the spray for 20 minutes before disassembling.

Hide

Comments

HTA HIGH LOADS CHAIN Review

Add review for product HTA HIGH LOADS CHAIN










Are you bot?

HTA GRAPHITE

Comments MULTI-PURPOSE GRAPHITE GREASE «HTA GRAPHITE» 400 ml

A new generation of multi-purpose graphite lubricants on a semi-synthetic basis. Thanks to special additives and solid lubricants in the composition, it is widely used both in industry and in domestic conditions. It has exceptional adhesive and anti-friction properties on metal surfaces. Prevents the effect of cold welding, protects friction during corrosion, forms an effective lubricating and separating film that does not become brittle, does not harden and is effective against compressive loads. The grease is highly resistant to all weather conditions, the effects of high temperatures, moisture, steam, salt solutions, acid compounds and alkalines. It does not contain bitumen and heavy metals, is not prone to dust binding, and is used for long-term storage.

219UAH

Description

Application:

heavy chains and open gears in internal or external areas; free gearboxes and gears; rollers, bearings, hinges and loops, pulleys; open transmissions of rotary tube furnaces, ball, rod and autogenous mills, dryers and mixing drums; open gears for debarking drums in the woodworking industry; large chains closed wire cables; rotary towers of cranes, crushers, and excavators; rotating towers of converters and buckets, highly loaded gear reducers, highly loaded sliding guides.

Industries:

  • Automotive industry;
  • Forestry, woodworking and pulp and paper industry;
  • Mechanical engineering and metalworking;
  • Construction materials Industry;
  • Chemical industry;
  • Oil industry;
  • Heavy industry;
  • Light industry.
Characteristics of the lubricant:
Thickener Aluminum soap
Solid lubricants Graphite ultrafine
Base oil Semi-synthetic
Color Black
NLGI class 00
Kin. viscosity at 40 °C 2500 мм2 / с DIN 51562
Kin. viscosity at 100 °C 100 мм2 / с DIN 51562
Operating temperatures +5 °C до +200 °C

Technologies

OZONE FRIENDLY

All products do not contain ozone-depleting components, safe for the atmosphere.

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

Directions

It works in any position at 360 degrees (even bottom up). Shake the bottle for 5 to 10 seconds before use. To handle hard-to-reach spots, place the extension tube in a horizontal position. Inflict on a pre-cleaned surface. Remove excess oil. After 3-5 minutes, without applying excessive force, proceed to disassemble. Heavily rusted parts abundantly treat the spray for 20 minutes before disassembling.

Hide

Comments

HTA GRAPHITE Review

Add review for product HTA GRAPHITE










Are you bot?

HTA SILICONE H1

Comments MULTI-PURPOSE SILICONE GREASE WITH FOOD TOLERANCE «HTA SILICONE H1» 400 ml

Modern high-tech silicone-based lubricant specifically for universal use in various friction units with NSF-H1 food certificate. It has excellent lubricating properties, demonstrates stable exploitation at high temperatures in a humid, dusty and aggressive environment. Neutral to various surfaces, such as metal, wood, rubber, polymer and glass. The spray does not contain resins, dyes or other unsafe substances. It has no color, smell and taste. The lubricant is also capable of performing sound-absorbing and current-insulating functions.

204UAH

Description

Application:

equipment for freezing, packaging, storage and transportation of pharmaceutical and food products; machinery for grinding grain and flour; coffee machines, mixers, blenders and other electric drive equipment; conveyor belts and chains on production lines; bearings, conveyor rollers, etc.; compressors, air conditioners and hydraulic systems; brewing units used to lubricate moving parts such as seals and bearings.

Industries:

  • Food industry;
  • Pharmaceutical industry;
  • Medical industry;
  • Flour, cereals and feed industry;
Characteristics of the lubricant:
Base oil Polydimethylsiloxane
Color Transparent
Kin. viscosity at 25 °C 350 мм2 / с DIN 51562
Kin. viscosity at 40 °C 270 мм2 / с DIN 51562
Kin. viscosity at 100 °C 110 мм2 / с DIN 51562
Operating temperatures -40 °C до +280 °C

NSF H1: физиологически безопасные материалы, применяемые для обслуживания оборудования пищевой и фармацевтической отраслей.

Technologies

(FPSL) FOOD PROCESSING SAFE LUBRICANTS

Special safe lubricants for the food and pharmaceutical industries, using which for their intended purpose, technically inevitable contact with foodstuffs cannot be excluded.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

Directions

It works in any position at 360 degrees (even bottom up). Shake the bottle for 5 to 10 seconds before use. To handle hard-to-reach spots, place the extension tube in a horizontal position. Inflict on a pre-cleaned surface. Remove excess oil. After 3-5 minutes, without applying excessive force, proceed to disassemble. Heavily rusted parts abundantly treat the spray for 20 minutes before disassembling.

Hide

Comments

HTA SILICONE H1 Review

Add review for product HTA SILICONE H1










Are you bot?

HTA RUST BLOCKER

Comments LONG-TERM ANTI-CORROSION GREASE «HTA RUST BLOCKER» 400ml

A powerful combination of special friction modifiers and corrosion inhibitors, lubricates and protects the surface for a long period. It has a high adhesive ability, has high plasticity at extremely low temperatures. Reliably protects against wear and jamming at high and dynamic loads. Guarantee efficiency in hard-to-reach places, penetrate existing rust and corrosion and restore the metal parts’ resource. It has maximum stability in all weather conditions and all types of humid environments: including saltwater, freshwater, rain, snow, heat, and cold.

175UAH

Description

Application:

sea vessels mechanisms, water transport and coastal equipment; open gearboxes, windlasses, screws, joints; cylindrical guideways, screw-cutting spindles, screws in underwater equipment; rolling and plain bearings in water pumps, hydraulic turbines, lock gates, car washes; cars chassis, heavy forestry, agricultural and construction equipment, etc.

Industries:

  • Metallurgical production;
  • Mechanical engineering;
  • Automotive Industry;
  • Shipbuilding;
  • Timber, woodworking and pulp and paper industry;
  • Light industry;
  • Aviation industry;
  • Chemical industry;
Characteristics of the lubricant:
Calcium Thickener
Base oil Mineral
Color Brown
NLGI class 1-2
Kin. viscosity at 40 °C 100 mm2 / s DIN 51562
Kin. viscosity at 100 °C 9 mm2 / s DIN 51562
Operating temperatures -25 °C to +80 °C

Technologies

OZONE FRIENDLY

All products do not contain ozone-depleting components, safe for the atmosphere.

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

Directions

It works in any position at 360 degrees (even bottom up). Shake the bottle for 5 to 10 seconds before use. To handle hard-to-reach spots, place the extension tube in a horizontal position. Inflict on a pre-cleaned surface. Remove excess oil. After 3-5 minutes, without applying excessive force, proceed to disassemble. Heavily rusted parts abundantly treat the spray for 20 minutes before disassembling.

Hide

Comments

HTA RUST BLOCKER Review

Add review for product HTA RUST BLOCKER










Are you bot?

HTA CLEANER METAL Н1

Comments ECO COLD CLEANER WITH FOOD CERTIFICATE «HTA CLEANER METAL» 400 ml

Safe cold cleaner with exceptional strong penetrating, dissolving and washing properties. Effective for such surfaces: metal, marble, stone, tile, elastomers, plastics, textiles. It is colorless and odorless, does not cause destruction or deformation of elastomers and polymeric materials. It does not cause corrosion of metals, it completely evaporates. It has NSF H1 approval and HALAL and KOSСHER certificates, which makes it suitable for use in the food and pharmaceutical industries.

204UAH

Description

Application:

It removes oil and grease stains, carbon scurf, soot, bitumen, wax, tar and partially dried paint. It is used to clean food and pharmaceutical equipment parts, machine tools, tools, auto/motorcycle spare parts, household pollution, electrical wiring connectors, tanks, industrial facilities, ships (bottom hold), chains.

Industries:

  • Removes oil and grease, carbon, soot, bitumen, wax, resin and paint that is not completely dry. It is used for cleaning parts of food and pharmaceutical equipment, machine tools, tools, auto/motorcycle parts, household dirt, wiring connectors, tanks and cisterns, industrial premises, ships (bottom of the hold), chains.
Characteristics of the lubricant:
Color Colorless
Kin. viscosity at 20 °C 1.8 mm2 / s DIN 51562
Operating temperatures -10 °C to +200 °C

NSF H1: физиологически безопасные материалы, применяемые для обслуживания оборудования пищевой и фармацевтической отраслей.

Koscher: обозначение для продуктов, которые по израильскому предписанию о приеме пищи считаются чистыми, разрешенными.

Halal: обозначение для продуктов, которые соответствуют мусульманским предписаниям halal.

Technologies

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

BIO

Biological decomposability of active components is 95% and harmless to our environment, due to this, it is used without problems in an environmentally friendly working environment.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

Directions

It works in any position at 360 degrees (even bottom up). Shake the bottle for 5 to 10 seconds before use. To handle hard-to-reach spots, place the extension tube in a horizontal position. Inflict on a pre-cleaned surface. Remove excess oil. After 3-5 minutes, without applying excessive force, proceed to disassemble. Heavily rusted parts abundantly treat the spray for 20 minutes before disassembling.

Hide

Comments

HTA CLEANER METAL Н1 Review

Add review for product HTA CLEANER METAL Н1










Are you bot?

HTA MULTI SPRAY

Comments UNIVERSAL PENETRATING OIL WITH MOLYBDENUM

HTA MULTI SPRAY is a product with a wide range of properties, it has penetrating, lubricating, anticorrosion and cleaning properties. Due to the unique composition of oils and solvents, the product displaces moisture, eliminates squeaks, dissolves rust, and cleans surfaces of glue, grease, and resins. After application, the product leaves an anticorrosion, protective film. Molybdenum disulfide in the composition will recreate a protective layer on the surface. Processing mechanisms before assembly will significantly facilitate their further disassembly, even after a long period of me.

109UAH

Description

Technologies

NEW SYNERGY TECHNOLOGY

Соединение двух или более активных компонентов , при котором суммированный эффект увеличивает силу средства, оказываемое каждым компонентом в отдельности

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

FAST ON

The rate of penetration into the metal for loosening rusted parts is 2 times higher than that of similar penetrating lubricants.

Directions

Shake well before use, inverting into current for 30 seconds. Spray the lubricant evenly from a distance of 20-30 cm on the treated surface. Wait a few minutes for the grease to work. After a few minutes, remove the dirt and rust. Wipe the surface with a clean cloth. If necessary, repeat If necessary, repeat the processing.

Hide

Comments

HTA MULTI SPRAY Review

Add review for product HTA MULTI SPRAY










Are you bot?

HTA SILICONE SPRAY

Comments SILICONE SPRAY GREASE

Is a universal waterproof agent with lubricating and protective properties. HTA SILICONE SPRAY forms a stable, dense film, repels moisture and reduces friction on all treated surfaces. It is used for lubrication of external car parts, rubber and plastic interior elements, door hinges and locks. Restores rubber elasticity.

109UAH

Description

Is a universal waterproof agent with lubricating and protective properties. HTA SILICONE SPRAY forms a stable, dense film, repels moisture and reduces friction on all treated surfaces. It is used for lubrication of external car parts, rubber and plastic interior elements, door hinges and locks. Restores rubber elasticity.

Technologies

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

FAST ON

The rate of penetration into the metal for loosening rusted parts is 2 times higher than that of similar penetrating lubricants.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

Directions

Clean the surface of dirt. Shake well before use, inverting for 30 seconds. Spray the lubricant evenly from a distance of 20-30 cm on the treated surface. If necessary, repeat the treatment.

Hide

Comments

HTA SILICONE SPRAY Review

Add review for product HTA SILICONE SPRAY










Are you bot?

HTA CARBOCLEANER

Comments

Is a highly active agent designed for cleaning carburetors, jets, intake valves, throttles without disassembling them. Contains special active solvents that quickly remove soot, oil and various impurities. Provides functionality and mobility of parts. HTA CARBOCLEANER normalizes engine speed.

169UAH

Description

The inventive high-activity agent is used for cleaning a carburetor, jumper valves and throttles without dismantling. Contains special active solvents that quickly remove carbon, soot, oil and various impurities. Provides functionality and mobility of parts. HTA CARBOCLEANER normalizes engine revolutions.

Technologies

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

FAST ON

The rate of penetration into the metal for loosening rusted parts is 2 times higher than that of similar penetrating lubricants.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

Directions

Shake well before applying, clean the engine with the engine warmed up to operating temperature. Spray the product in small portions on the contaminated surfaces of the carburetor or throttle unit until they are completely cleaned. Remove the remains of dissolved impurities with a dry, clean cloth.

Hide

Comments

HTA CARBOCLEANER Review

Add review for product HTA CARBOCLEANER










Are you bot?

HTA MONTAGE & BRAKE CLEANER

Comments UNIVERSAL CLEANER-DEGREASER 400 ML

Is used to clean brake pads, drums, discs, cylinders, ABS system elements, clutch and bearings. Removes oil, soot, resins, grease, brake fluid and completely degreases metal surfaces and is used as a universal degreaser during service work.

179UAH

Description

Is used to clean brake pads, drums, discs, cylinders, ABS system elements, clutch and bearings. Removes oil, soot, resins, grease, brake fluid and completely degreases metal surfaces and is used as a universal degreaser during service work.

Technologies

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

FAST ON

The rate of penetration into the metal for loosening rusted parts is 2 times higher than that of similar penetrating lubricants.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

Directions

Before use shake well by inverting for 30 seconds. Spray the product or apply pointwise on the treated parts and connections. Leave for a few minutes for the cleaner to work. If necessary, repeat the treatment.

Hide

Comments

HTA MONTAGE & BRAKE CLEANER Review

Add review for product HTA MONTAGE & BRAKE CLEANER










Are you bot?

OZONE FRIENDLY

All products do not contain ozone-depleting components, safe for the atmosphere.

Aerosols are used not only for our everyday care products, cosmetics, but also in medicine, and in industry, and in various household chemicals. Aerosols themselves are not harmful, but the propellants which they contain are. Our aerosols are produced without the use of propellant, the so-called freon. These substances are ozone-depleting, they contain active chlorine and fluorine in their composition. And such substances, entering the atmosphere, interacting with ultraviolet, pose a threat to ozone. According to technology, aerosols contain hydrocarbon mixtures, propane, butane, isobutane, which are not harmful to the ozone layer and the environment.

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured to the standards of HTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

Thanks to the growing quality requirements, the expected result from the lubricants also increases. Thanks to the precisely selected and balanced formulation, the products meet the temporary, chemical, thermal and mechanical requirements for expected production loads. A series of HTA MUNICH GmbH has many advantages and has proven itself positively during tests and in technical use. Intensive cooperation with research centers, industry partners and end users, as well as knowledge, skills and great interest of our employees, are the guarantors of creating more and more advanced high performance lubricants that contribute to success.

PROTECT

The innovative formula of fluorocarbon concentrate on the solvent forms a reliable protection against moisture, protecting the surface from dirt, ultraviolet radiation and the formation of salt stains.

The technology has been developed to impart hydrophobic properties and is designed to protect surfaces exposed to moisture, dirt and sun exposure. It creates a water-repellent coating for a long time, protects the surface in difficult conditions, and breathability allows the material to breathe. The technology combines ecology and reliable protection of textiles. A hydrophobic coating increases the tension on the surface of the material, causing water to collect in droplets rather than penetrating further into the fibers. This water-repellent outer surface provides an additional air layer for thermal insulation. And, most importantly, it prevents the appearance of condensation on the inside of clothes, helps the membrane to work.

BAG ON VALVES

BOV refers to packages with barrier protection, it does not allow the product to come into contact with air and is gradually becoming more and more popular on the world market. Especially in the cosmetic and pharmaceutical industry.

Aerosol can with valve package allows you to dispense products of any consistency. In addition, the gas in this package is separate from the product and also does not come into contact with it - the product itself is placed in a special package, and the gas is located between the package and the walls of the vial.

NEW TECHNOLOGY 360°

The updated technology allows you to spray the sprayer in any position (upside down). This creates comfort and ease of use.

The presence of a special 360-degree (dual) valve makes it easy to use products where access is limited or there is a need to use a cylinder at complex angles of inclination. To process hard-to-reach parts or surfaces, it is necessary to change the position of the aerosol can during spraying or even to spray from an inverted can.

FAST ON

The rate of penetration into the metal for loosening rusted parts is 2 times higher than that of similar penetrating lubricants.

The active ingredients penetrate well even into complex mechanisms, freeing up the corroded parts. The technology contributes to high penetrating power and quick rust softening. A feature of this product is that penetrating into the knot, it does not follow from there, forming not just a film that effectively reduces the wear that occurs in the process of friction, while it is quite durable and retains the inherent properties for a long time.

BIO

Biological decomposability of active components is 95% and harmless to our environment, due to this, it is used without problems in an environmentally friendly working environment.

Compliance with product safety requirements is one of the main tasks of enterprises. Not only raw materials, but also used lubricants or cleaning materials should not endanger human health and harm the environment. For the process of decomposition, microorganisms respond. In the course of decomposition, microorganisms consume oxygen, and the more intensive the process, the higher their oxygen demand.

TARGET SPRAY

With the updated actuator, spraying has become more precise, which ensures the fastest and effective application of the product. Economy of use with new technology increased to 25%.

Aerosol button has a spout of not great length and diameter. Using this actuator, the liquid under high propylene pressure passes through a narrow spray channel. And at the time of spraying the tool quickly concentrates at the desired point, and does not create a cloud of small particles. Active components do not dissipate, but hit right on target. As a result, the efficiency of use increases, and the cost of funds decreases.

ANTI ICE TECHNOLOGY

Specially developed formula in combination of active substances forms a reliable coating to protect fishing cords, fishing lines, threads from freezing and prevents the appearance of ice on the surface, increasing the comfort and convenience in winter fishing.

The technology was developed for possible fishing, taking into account its work at low temperatures down to -10 °. A special coating formed on the surface gives the line extra protection, durability and contributes to an increase in the casting distance. At the same time, the composition of this innovative product is environmentally friendly. Anti-freezing agents in the composition allow not only to use the threads in the cold season but also in any time, keeping them from external influences, thereby prolonging the service life.

NON BURN

Special technology allows the cooling spray to be applied to the open skin, minimizing the risk of getting irritation.

Eucalyptol and menthol, which are a part of the compound, have an analgesic antibacterial effect. The tool quickly penetrates the deep layers of the epidermis and softens the skin. The composition also includes an air conditioner based on essential oils for sensitive skin that is prone to irritation. Since active substances can cause minor skin reactions. We decided to give maximum comfort sensations and protect the owners of delicate skin from burning sensation. Due to this, it is possible to get maximum benefit from cooling without risking an allergic reaction.

(FPSL) FOOD PROCESSING SAFE LUBRICANTS

Special safe lubricants for the food and pharmaceutical industries, using which for their intended purpose, technically inevitable contact with foodstuffs cannot be excluded.

All components of lubricants meet the standards and requirements for modern products of this type. Materials are harmless to health, have no smell and taste. They satisfy the stringent requirements of NSF International. NSF International is an international independent organization accredited for the registration of non-food compounds, including lubricants, cleaners and chemical reagents for the treatment of water used in the food industry. As required by NSF, food manufacturers, as well as medical and cosmetic agents, are required to identify all hazardous points in the enterprise where contact with the product is possible. Manufacturers must apply safe lubricants.

NATURAL

Special technologies guarantee the preservation of the beneficial properties of natural ingredients.

The increased content in the composition of natural ingredients has anti-inflammatory, antibacterial, analgesic effect. Thanks to the natural ingredients that make up the product, the skin, after application, becomes tender, moisturized and well-groomed, and also additionally protects it from irritation. Due to the biocompatibility, our body's receptors “read” natural substances and actively absorb them.

SILVER SHIELD TECHNOLOGY

Innovative technology with silver ions has antiseptic and antibacterial, refreshes and tones the skin, regulates sweating.

Today, silver is used as an effective bacteriostatic agent in a wide variety of fields, such as cosmetics or medicine. Silver is used to feel hygiene, protection and freshness - in everyday life and in extreme conditions. The technology consists of active silver trace elements.This creates highly efficient positive ions that are used in precisely metered quantities. Silver ions with a positive charge block the multiplication of bacteria, which eliminates the appearance of an unpleasant smell of sweat. Odor-causing bacteria cannot adapt to their effects. The need for constant washing of textiles due to unpleasant body odors will disappear. It also extends its service life. That is why the technology is not only economical, but also has an indirect environmental impact during textile care, wearing and storage of textiles.

CLEAN HANDS

Aerosol spray greatly increases the convenience and economy of applying the compound.

Aerosol spray greatly increases the convenience and economy of applying the compound. The advantage of sprays is the possibility of uniform application of the required amount without over-consumption of the product.

EXTRA DRY

Control of spraying in the actuator contributes to the minimum amount of time to wait for the result.

According to the technology, the actuator button has the unique ability to control the size of droplets during evacuation from a cylinder. The liquid is applied by tiny particles, almost dry clouds, which ensures rapid absorption into the surface of products, gives a feeling of dry skin and long-lasting freshness. After coming into contact with the surface, the deodorant instantly interacts with it. After applying the product, you will be protected from wet spots and moisture sense. And excessive moisture does not deform the seams and the shape of things. The same form of the sprayer is ergonomically designed for use in different positions of the cylinder without losing its effectiveness and ease of pressing. This ensures smooth pressure and minimal valve leakage. It dries quickly after application and leaves a light fragrant trail.

5 IN 1

Technical and chemical parameters create the perfect symbiosis that would eliminate the most common problems in the use of lubricants.

A special feature is the combination of several useful properties in a single product. Excellent lubrication removes unpleasant squeaks and noises, reduces friction. Excellent penetrating properties guarantee quick and convenient use. Prevents corrosion of metal surfaces and ensures smooth movement of equipment. Forms a thin but durable protective film that protects the surface from oxidation. Silicone has no color and smell, retains its properties for a long period of time. Reduces friction and damage of parts.

USA PREMIUM QUALITY

The highest quality materials and raw materials produced in the USA. Components are manufactured exclusively in the United States, where product quality is carefully monitored at every level.

Control over the development of new products provides for the establishment of requirements for quality and technical level. The United States believes that quality control significantly affects both high-quality manufacturing. Therefore, product quality control is enhanced at all stages of its life cycle. And it carries not only verification, but also analytical in nature. The purpose of the control of materials and components is to put into production only those that fully ensure the quality of the finished product. But perhaps the most important criterion for the effectiveness of the quality management system is the degree of satisfaction of requests. For those who value high quality!

MADE SAFE NON TOXIC

Signet “MADE SAFE NON TOXIC” on the product means that the products are made from safe ingredients that practically do not harm the ecosystem and are based on leading international standards.

We do our best to research the ingredients for general toxicity. By studying the molecular structure of a product, our scientists determine whether the elements are safe to use in the product. The components have been carefully researched by scientists to make sure they are made without toxic solvents. The ingredients are also being studied by chemists for general harm to the ecosystem, as well as toxicity to aquatic organisms and animals. We always strive to protect your health and provide safer and healthier foods. And this print allows us to take quality to a new level!

BIG SIZE TECHNOLOGY

The new size of the balloon allows you to accommodate more active components due to whereby the use of the product is increasing up to 50 percent.

The new size of the balloon allows you to accommodate more active components due to whereby the use of the product is increasing up to 50 percent.

0% ALCOHOL

Special formula developed for safe and delicate cleaning, which does not destroy the protective and oleophobic coating of all types screens and sensitive optics, providing delicate cleaning.

Special formula developed for safe and delicate cleaning, which does not destroy the protective and oleophobic coating of all types screens and sensitive optics, providing delicate cleaning.

99,99% KILLS UP TO VIRUS AND BACTERIA

Composition based on 99.7% isopropyl alcohol, quickly, effectively and reliably destroys viruses, bacteria and disinfects the treated surface.

Composition based on 99.7% isopropyl alcohol, quickly, effectively and reliably destroys viruses, bacteria and disinfects the treated surface.

FINE DROP

Thanks to the fine dispersion droplet, the savings in use have increased up to 25%.

Thanks to the fine dispersion droplet, the savings in use have increased up to 25%.

PURE ALCOHOL 99,7%

Leaves no residue, suitable for alcohol resistant items.

Leaves no residue, suitable for alcohol resistant items.

ELECTRONICS CLEANER

Leaves no residue, ideal for quick disinfection, cleaning and degreasing of electrical and electronic components.

Leaves no residue, ideal for quick disinfection, cleaning and degreasing of electrical and electronic components.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the strength of the agent, rendered by each component separately

According to the latest achievement and modern standards, products with SYNERGY TECHNOLOGY technology function in the most difficult conditions, under increased loads, at maximum speeds, in a wide temperature range, and under other aggressive influences. Thanks to perfectly matched ingredients that result in a strong effect.

HERGESTELLT IN DEUTSCHLAND ABGEPACKT IN DER UKRAINE

Products manufactured in Germany and packaged for Ukraine according to the standards of NTA MUNICH GmbH. The materials are subject to strict control and regulation, they have special properties under different operating conditions.

Thanks to the growing quality requirements, the expected result from the lubricants also increases. Thanks to the precisely selected and balanced formulation, the products meet the temporary, chemical, thermal and mechanical requirements for expected production loads. A series of NTA MUNICH GmbH has many advantages and has proven itself positively during tests and in technical use. Intensive cooperation with research centers, industry partners and end users, as well as knowledge, skills and great interest of our employees, are the guarantors of creating more and more advanced high performance lubricants that contribute to success.

BAG ON VALVES

BOV refers to packages with barrier protection, it does not allow the product to come into contact with air and is gradually becoming more and more popular on the world market. Especially in the cosmetic and pharmaceutical industry.

Aerosol can with valve package allows you to dispense products of any consistency.

In addition, the gas in this package is separate from the product and also does not come into contact with it - the product itself is placed in a special package, and the gas is located between the package and the walls of the vial.

OZONE FRIENDLY

All products do not contain ozone-depleting components, safe for the atmosphere.

Aerosols are used not only for our everyday care products, cosmetics, but also in medicine, and in industry, and in various household chemicals. Aerosols themselves are not harmful, but the propellants which they contain are. Our aerosols are produced without the use of propellant, the so-called freon.

These substances are ozone-depleting, they contain active chlorine and fluorine in their composition. And such substances, entering the atmosphere, interacting with ultraviolet, pose a threat to ozone. According to technology, aerosols contain hydrocarbon mixtures, propane, butane, isobutane, which are not harmful to the ozone layer and the environment.

FAST ON

The rate of penetration into the metal for loosening rusted parts is 2 times higher than that of similar penetrating lubricants.

The active ingredients penetrate well even into complex mechanisms, freeing up the corroded parts. The technology contributes to high penetrating power and quick rust softening. A feature of this product is that penetrating into the knot, it does not follow from there, forming not just a film that effectively reduces the wear that occurs in the process of friction, while it is quite durable and retains the inherent properties for a long time.

NEW SYNERGY TECHNOLOGY

The combination of two or more active components, in which the combined effect increases the power of the tool provided by each component separately.

According to the latest achievements and modern standards, products with SYNERGY TECHNOLOGY function in the most difficult conditions, at high loads, at maximum speeds, at a wide range of temperatures, and under other aggressive influences. Thanks to perfectly selected components that result in a strong effect.

SILVER SHIELD TECHNOLOGY

Innovative technology with silver ions has antiseptic and antibacterial, refreshes and tones the skin, regulates sweating.

Today, silver is used as an effective bacteriostatic agent in a wide variety of fields, such as cosmetics or medicine. Silver is used to feel hygiene, protection and freshness - in everyday life and in extreme conditions.

The technology consists of active silver trace elements.This creates highly efficient positive ions that are used in precisely metered quantities. Silver ions with a positive charge block the multiplication of bacteria, which eliminates the appearance of an unpleasant smell of sweat.  Odor-causing bacteria cannot adapt to their effects.

The need for constant washing of textiles due to unpleasant body odors will disappear. It also extends its service life. That is why the technology is not only economical, but also has an indirect environmental impact during textile care, wearing and storage of textiles.

BERUCOAT MC

Innovative microcapsule technology provides long-term lubrication of equipment and eliminates the intermittent movement of parts.

Spherical containers filled with a special lubricant, visible only under a microscope, are included as an integrated additional lubrication. When loaded on friction or lubrication sites, they release the lubricant contained in them. As a result, a very effective lubricating layer is formed between the friction pairs involved, creating a protective film on the surfaces, which is characterized by a long service life.

PROtect

The innovative formula of fluorocarbon concentrate on the solvent forms a reliable protection against moisture, protecting the surface from dirt, ultraviolet radiation and the formation of salt stains.

The technology has been developed to impart hydrophobic properties and is designed to protect surfaces exposed to moisture, dirt and sun exposure. It creates a water-repellent coating for a long time, protects the surface in difficult conditions, and breathability allows the material to breathe. The technology combines ecology and reliable protection of textiles.

A hydrophobic coating increases the tension on the surface of the material, causing water to collect in droplets rather than penetrating further into the fibers. This water-repellent outer surface provides an additional air layer for thermal insulation. And, most importantly, it prevents the appearance of condensation on the inside of clothes, helps the membrane to work.

new TECHNOLOGY 360°

The updated technology allows you to spray the sprayer in any position (upside down). This creates comfort and ease of use.

The presence of a special 360-degree (dual) valve makes it easy to use products where access is limited or there is a need to use a cylinder at complex angles of inclination.

To process hard-to-reach parts or surfaces, it is necessary to change the position of the aerosol can during spraying or even to spray from an inverted can.

TARGET SPRAY

With the updated actuator, spraying has become more precise, which ensures the fastest and effective application of the product. Economy of use with new technology increased to 25%.

Aerosol button has a spout of not great length and diameter. Using this actuator, the liquid under high propylene pressure passes through a narrow spray channel. And at the time of spraying the tool quickly concentrates at the desired point, and does not create a cloud of small particles. Active components do not dissipate, but hit right on target. As a result, the efficiency of use increases, and the cost of funds decreases.

NON BURN

Special technology allows the cooling spray to be applied to the open skin, minimizing the risk of getting irritation.

Eucalyptol and menthol, which are a part of the compound, have an analgesic antibacterial effect. The tool quickly penetrates the deep layers of the epidermis and softens the skin. The composition also includes an air conditioner based on essential oils for sensitive skin that is prone to irritation. Since active substances can cause minor skin reactions. We decided to give maximum comfort sensations and protect the owners of delicate skin from burning sensation. Due to this, it is possible to get maximum benefit from cooling without risking an allergic reaction.

BIO

Biological decomposability of active components is 95% and harmless to our environment, due to this, it is used without problems in an environmentally friendly working environment.

Compliance with product safety requirements is one of the main tasks of enterprises. Not only raw materials, but also used lubricants or cleaning materials should not endanger human health and harm the environment.

For the process of decomposition, microorganisms respond. In the course of decomposition, microorganisms consume oxygen, and the more intensive the process, the higher their oxygen demand.

5 IN 1

Technical and chemical parameters create the perfect symbiosis that would eliminate the most common problems in the use of lubricants.

A special feature is the combination of several useful properties in a single product. Excellent lubrication removes unpleasant squeaks and noises, reduces friction. Excellent penetrating properties guarantee quick and convenient use. Prevents corrosion of metal surfaces and ensures smooth movement of equipment. Forms a thin but durable protective film that protects the surface from oxidation. Silicone has no color and smell, retains its properties for a long period of time. Reduces friction and damage of parts.

EXTRA DRY

Control of spraying in the actuator contributes to the minimum amount of time to wait for the result.

According to the technology, the actuator button has the unique ability to control the size of droplets during evacuation from a cylinder. The liquid is applied by tiny particles, almost dry clouds, which ensures rapid absorption into the surface of products, gives a feeling of dry skin and long-lasting freshness. After coming into contact with the surface, the deodorant instantly interacts with it. After applying the product, you will be protected from wet spots and moisture sense. And excessive moisture does not deform the seams and the shape of things. The same form of the sprayer is ergonomically designed for use in different positions of the cylinder without losing its effectiveness and ease of pressing. This ensures smooth pressure and minimal valve leakage. It dries quickly after application and leaves a light fragrant trail.

(FPSL) FOOD PROCESSING SAFE LUBRICANTS

Special safe lubricants for the food and pharmaceutical industries, using which for their intended purpose, technically inevitable contact with foodstuffs cannot be excluded.

All components of lubricants meet the standards and requirements for modern products of this type. Materials are harmless to health, have no smell and taste. They satisfy the stringent requirements of NSF International.

NSF International is an international independent organization accredited for the registration of non-food compounds, including lubricants, cleaners and chemical reagents for the treatment of water used in the food industry.

As required by NSF, food manufacturers, as well as medical and cosmetic agents, are required to identify all hazardous points in the enterprise where contact with the product is possible. Manufacturers must apply safe lubricants.

NATURAL

Special technologies guarantee the preservation of the beneficial properties of natural ingredients.

The increased content in the composition of natural ingredients has anti-inflammatory, antibacterial, analgesic effect. Thanks to the natural ingredients that make up the product, the skin, after application, becomes tender, moisturized and well-groomed, and also additionally protects it from irritation. Due to the biocompatibility, our body's receptors “read” natural substances and actively absorb them.

CLEAN HANDS

Aerosol spray greatly increases the convenience and economy of applying the compound.

Aerosol spray greatly increases the convenience and economy of applying the compound. The advantage of sprays is the possibility of uniform application of the required amount without over-consumption of the product.

ANTI ice TECHNOLOGY

Specially developed formula in combination of active substances forms a reliable coating to protect fishing cords, fishing lines, threads from freezing and prevents the appearance of ice on the surface, increasing the comfort and convenience in winter fishing.

The technology was developed for possible fishing, taking into account its work at low temperatures down to -10 °. A special coating formed on the surface gives the line extra protection, durability and contributes to an increase in the casting distance. At the same time, the composition of this innovative product is environmentally friendly. Anti-freezing agents in the composition allow not only to use the threads in the cold season but also in any time, keeping them from external influences, thereby prolonging the service life.

USA PREMIUM QUALITY

The highest quality materials and raw materials produced in the USA. Components are manufactured exclusively in the United States, where product quality is carefully monitored at every level.

Control over the development of new products provides for the establishment of requirements for quality and technical level.

The United States believes that quality control significantly affects both high-quality manufacturing. Therefore, product quality control is enhanced at all stages of its life cycle. And it carries not only verification, but also analytical in nature.

The purpose of the control of materials and components is to put into production only those that fully ensure the quality of the finished product. But perhaps the most important criterion for the effectiveness of the quality management system is the degree of satisfaction of requests.

For those who value high quality!

MADE SAFE NON TOXIC

Signet “MADE SAFE NON TOXIC” on the product means that the products are made from safe ingredients that practically do not harm the ecosystem and are based on leading international standards.

We do our best to research the ingredients for general toxicity. By studying the molecular structure of a product, our scientists determine whether the elements are safe to use in the product. The components have been carefully researched by scientists to make sure they are made without toxic solvents. The ingredients are also being studied by chemists for general harm to the ecosystem, as well as toxicity to aquatic organisms and animals.

We always strive to protect your health and provide safer and healthier foods. And this print allows us to take quality to a new level!

BIG SIZE TECHNOLOGY

The new size of the balloon allows you to accommodate more active components due to whereby the use of the product is increasing up to 50 percent.

0% ALCOHOL

Special formula developed for safe and delicate cleaning, which does not destroy the protective and oleophobic coating of all types screens and sensitive optics, providing delicate cleaning.