PRODUCTS

НТА CARBON REMOVER
Comments CARBON REMOVER «НТА CARBON REMOVER» 400 ml.
Spray used for quick cleaning of rifled and smooth-bore weapons. Suitable for hunting, sports, military, antique weapons, small and large caliber. Allows you to clean the surface without much effort. Penetrates inaccessible places, dissolves carbon sedimentation, removes persistent grease residues, oil and coal particles adhering to the metal.
327UAH
Description
It is recommended for cleaning the cartridge ejection system in revolvers and the cartridge feeding device in pistols, which are prone to clogging with powder residues. It will keep the weapon functioning properly with its daily use. Does not contain ammonia. Non-toxic.
High Tech Aerosol Gun Care Spray is a range of weapon care aerosols created in collaboration with HTA MUNICH GmbH professionals. Thanks to the compositions and raw materials developed by the USA, the products of the line meet all modern requirements for servicing weapons mechanisms.
Technologies

OZONE FRIENDLY
All products do not contain ozone-depleting components, safe for the atmosphere.

NEW TECHNOLOGY 360°
The updated technology allows you to spray the sprayer in any position (upside down). This creates comfort and ease of use.

USA PREMIUM QUALITY
The highest quality materials and raw materials produced in the USA. Components are manufactured exclusively in the United States, where product quality is carefully monitored at every level.
Directions

Works in any position by 360 degrees (even upside down). Make sure that the weapon is unloaded and the magazine is removed! Allow the weapon to cool. Remove large particles of dirt. Shake the balloon for 3-5 seconds. Apply the product evenly for 15-25 minutes; remove the remnants of the cleaner from the surface. In case of heavy soiling, use a brush to clean the weapon (the time for mechanical cleaning depends on the degree of contamination).
After use, it is recommended to neutralize aggressive residues with an HTA DEGREASER & CLEANER and treat the weapon with HTA NEUTRAL SYNTHETIC OIL or HTA RUST PREVENT oils.
Comments

НТА FOAM BORE CLEANER
Comments Weapon foam «НТА FOAM BORE CLEANER» 500 ml.
Weapon foam is used to clean the inner surface of the barrel bore of rifled and smooth-bore weapons. Suitable for hunting, sports, military, antique weapons, small and large caliber. Cleans from copper deposits, powder sedimentation partially dissolve the remains of brass, lead and stubborn dirt. Does not contain ammonia. Non-toxic.
422UAH
Description
The dense consistency of foam allows you to penetrate inaccessible places, reliably and for a long time maintains the surface of the bore in perfect condition. Thanks to a special flexible tube, the cleaning method for convenience and safety is superior to cleaning with rigid brushes.
Attention! Do not allow the foam to get into the shutter mechanism of the trigger, on wooden and varnished surfaces.
High Tech Aerosol Gun Care Spray is a range of weapon care aerosols created in collaboration with HTA MUNICH GmbH professionals. Thanks to the compositions and raw materials developed by the USA, the products of the line meet all modern requirements for servicing weapons mechanisms.
Technologies

NEW TECHNOLOGY 360°
The updated technology allows you to spray the sprayer in any position (upside down). This creates comfort and ease of use.

USA PREMIUM QUALITY
The highest quality materials and raw materials produced in the USA. Components are manufactured exclusively in the United States, where product quality is carefully monitored at every level.

MADE SAFE NON TOXIC
Signet “MADE SAFE NON TOXIC” on the product means that the products are made from safe ingredients that practically do not harm the ecosystem and are based on leading international standards.
Directions

Works in any position at 360 degrees (even upside down). Make sure that the weapon is unloaded and the magazine is removed! Allow the weapon to cool. Muffle a section of a trunk with a rag or a false patron. Shake the balloon for 3-5 seconds and apply foam into the barrel bore from the chamber side until foam appears from the muzzle end. Leave the weapon horizontal for 25-35 minutes. In case of severe contamination, repeat the process with an increase in exposure time up to 45-55 minutes.
Remove the remaining foam with patches. The result of the reaction to copper residues is the appearance of the blue color of foam or patches. After use, it is recommended to neutralize aggressive residues with the help of HTA DEGREASER & CLEANER and treat the weapon with oils HTA NEUTRAL SYNTHETIC OIL or HTA RUST PREVENT.
Comments
НТА FOAM BORE CLEANER Review

HTA DEGREASER & CLEANER
Comments vWeapon cleaner «HTA DEGREASER & CLEANER» 500 ml.
Weapon cleaner quickly removes dirt and degreases parts of mechanisms. Suitable for all types of weapons. It has a very high degree of penetration, displaces moisture and evaporates quickly. It removes rust and quickly activates jammed mechanisms.
291UAH
Description
Thanks to a special nozzle and a strong pressure, it provides optimal cleaning, both with complete and incomplete disassembly of weapons. Recommended neutralizing aggressive residues of weapon cleaners. Prepares machined parts for further lubrication and maintenance.
Attention! Do not use on wood, chrome, painted and varnished surfaces.
High Tech Aerosol Gun Care Spray is a range of weapon care aerosols created in collaboration with HTA MUNICH GmbH professionals. Thanks to the compositions and raw materials developed by the USA, the products of the line meet all modern requirements for servicing weapons mechanisms.
Technologies

OZONE FRIENDLY
All products do not contain ozone-depleting components, safe for the atmosphere.

NEW TECHNOLOGY 360°
The updated technology allows you to spray the sprayer in any position (upside down). This creates comfort and ease of use.

USA PREMIUM QUALITY
The highest quality materials and raw materials produced in the USA. Components are manufactured exclusively in the United States, where product quality is carefully monitored at every level.
Directions

Works in any position at 360 degrees (even upside down). Make sure the weapon is unloaded and the magazine is removed. Allow the weapon to cool. Before use, check the compatibility of the product with the surface. Shake the balloon for 3-5 seconds.
Apply to all parts and mechanisms of weapons. Use until the contamination is removed. After use, it is recommended to treat the barrel with oils HTA NEUTRAL SYNTHETIC OIL or HTA RUST PREVENT.
Comments
HTA DEGREASER & CLEANER Review

HTA NEUTRAL SYNTHETIC OIL
Comments Neutral synthetic oil «HTA NEUTRAL SYNTETIC OIL» 400 мл, 200 ml.
The oil is used for the care and maintenance of rifled and smooth-bore weapons. Suitable for hunting, sports, combat, signal, antique weapons, small and large caliber. The tool penetrates deeply into the threaded, articulated and pin joints of the weapon and lubricates them. Provides the necessary glide of all the mechanics of the weapon, protects against moisture and corrosion.
210UAH
Description
The oil creates a neutral acid-base medium on the surface, which allows it to be used for conservation. It does not harden, does not stick together and guarantees perfect operation at a wide temperature range from -40 to + 220°С. It is safe for humans and the environment, as evidenced by the presence of food admission NSF H2. It has a pleasant aroma.
High Tech Aerosol Gun Care Spray is a range of weapon care aerosols created in collaboration with HTA MUNICH GmbH professionals. Thanks to the compositions and raw materials developed by the USA, the products of the line meet all modern requirements for servicing weapons mechanisms.
Technologies

(FPSL) FOOD PROCESSING SAFE LUBRICANTS
Special safe lubricants for the food and pharmaceutical industries, using which for their intended purpose, technically inevitable contact with foodstuffs cannot be excluded.

USA PREMIUM QUALITY
The highest quality materials and raw materials produced in the USA. Components are manufactured exclusively in the United States, where product quality is carefully monitored at every level.

MADE SAFE NON TOXIC
Signet “MADE SAFE NON TOXIC” on the product means that the products are made from safe ingredients that practically do not harm the ecosystem and are based on leading international standards.
Directions

Works in any position at 360 degrees (even upside down). Make sure the weapon is unloaded and the magazine is removed. Allow the weapon to cool. Clean weapons of large contaminants, mechanical particles, sand, dust, etc. Dry lubricated surfaces.
Before use, we recommend the use of HTA CARBON REMOVER, HTA FOAM BORE CLEANER and HTA DEGREASER & CLEANER cleaners. Shake the spray for 3-5 seconds and apply evenly on the parts and mechanisms of the weapon. Remove extra oil with patches and rags, leaving only a protective film.
Comments
HTA NEUTRAL SYNTHETIC OIL Review

HTA RUST PREVENT
Comments Preservation oil «HTA RUST PREVENT» 200 ml.
The oil is used for lubrication and protection during long-term storage of rifled and smooth-bore weapons. Suitable for hunting, sports, combat, signal, antique weapons, small and large caliber. It guarantees reliable protection of weapons against corrosion, maintains its original appearance and condition, even during prolonged storage in the open air.
228UAH
Description
The oil creates a neutral acid-base environment on the surface, does not harden, does not stick together at a wide temperature range from -20°С to +160°С. It is safe for humans and the environment, as evidenced by the availability of food admission NSF H1. Ideal for knife care. It has a pleasant aroma.
High Tech Aerosol Gun Care Spray is a range of weapon care aerosols created in collaboration with HTA MUNICH GmbH professionals. Thanks to the compositions and raw materials developed by the USA, the products of the line meet all modern requirements for servicing weapons mechanisms.
Technologies

(FPSL) FOOD PROCESSING SAFE LUBRICANTS
Special safe lubricants for the food and pharmaceutical industries, using which for their intended purpose, technically inevitable contact with foodstuffs cannot be excluded.

USA PREMIUM QUALITY
The highest quality materials and raw materials produced in the USA. Components are manufactured exclusively in the United States, where product quality is carefully monitored at every level.

MADE SAFE NON TOXIC
Signet “MADE SAFE NON TOXIC” on the product means that the products are made from safe ingredients that practically do not harm the ecosystem and are based on leading international standards.
Directions

Works in any position by 360 degrees (even upside down). Make sure the weapon is unloaded and the magazine is removed. Allow the weapon to cool. Clean weapons of large contaminants, mechanical particles, sand, dust, etc. Dry lubricated surfaces. Before use, we recommend the use of HTA CARBON REMOVER, HTA FOAM BORE CLEANER and HTA DEGREASER & CLEANER cleaners.
Shake the balloon for 3-5 seconds and apply evenly to parts and mechanisms of weapons. Remove excess oil with patches and rags, leaving only a protective film. After long-term storage, the weapon does not require de-preservation.
Comments
HTA RUST PREVENT Review
CONTACTS
- MAIN OFFICE:
- 03179 Ukraine, Kiev, Akhtyrsky Lane 3, office 311
- +38(067)333-93-72
- +38(067)407-74-67
- info@hta.com.ua
- Telegram
- SALES DEPARTMENT:
- +38(067)570-82-00
- +38(067)407-74-67
НТА CARBON REMOVER Review
Add review for product НТА CARBON REMOVER